Maritime Education

BTM/BRM/BTRM ON SIMULATOR (IMO MODULE 1.22, STCW SECTION B-V/a, CH VIII AND IMO MODULE 1.40. SIRE 2.0 AND RIGHTSHIP COMPLIANCE)

Course Duration : 5 Days

Course Description:

This course is designed to provide practical and scenario-based training to deck officers on effective Bridge Team Management (BTM), Bridge Resource Management (BRM), and Bridge Team & Resource Management (BTRM) using full mission bridge simulators.

The training focuses on enhancing situational awareness, decision-making, communication, leadership, and teamwork in accordance with IMO Model Course 1.22, STCW Section B-V/a & Chapter VIII, and IMO Model Course 1.40 guidelines.

Special emphasis is placed on meeting modern industry requirements including SIRE 2.0 inspections and RightShip expectations, ensuring officers are competent in managing bridge operations safely under normal and emergency conditions.

The course enables officers to effectively utilize all available resources—human, technical, and procedural—to minimize human error and ensure safe navigation in complex operational environments.

Content of the Course:

• Principles of Bridge Team Management (BTM), BRM & BTRM.
• Leadership, communication, and teamwork on the bridge.
• Situational awareness and workload management.
• Decision-making processes in normal and emergency situations.
• Effective use of bridge resources (human & equipment)
• Passage planning and execution with team involvement.
• Bridge watchkeeping practices as per STCW requirements.
• Application of COLREGS in complex traffic situations using simulator.
• Bridge procedures in restricted visibility, heavy traffic, and pilotage waters.
• Integration and effective use of navigational equipment (Radar, ARPA, ECDIS, AIS).
• Human factors and error management on the bridge.
• Crisis management and emergency response scenarios on simulator.
• Communication protocols with pilot, VTS, and engine room.
• Compliance with **SIRE 2.0 requirements for bridge operations.
• Alignment with **RightShip expectations for navigational safety and risk management.
• Practical simulator exercises covering real-life navigational challenges.
• Debriefing and performance evaluation for continuous improvement.

Bridge Team & Resource Management – Level 1 – Collision avoidance and bridge team work.

Course Duration : 5 Days

Course Description: This course is to provide practical knowledge to navigating watch keeping officers on the application of Collision Avoidance Regulations, to effectively manoeuvre a vessel in a heavy traffic areas & prevent close quarter situations and collisions. The navigating officer shall gain confidence in keeping independent bridge watches.

Content of the course :

• Ship Manoeuvring Characteristics.
• Passage Planning
• Bridge Watchkeeping in open sea, coastal areas, Traffic separation schemes & pilotage water.
• Application of international regulations for preventing collisions at sea, 1972 as amended.
• Use of navigational equipment for collision avoidance & passage monitoring.
• Response to navigational equipment failure emergencies.
• Anchoring methods and limitations of anchoring equipment.
• Prinicples of bridge team and resoursce management & its practical applications.

PASSAGE PLAN WITH ECDIS ( IMO RES 893/21 AND IMO MODULE 1,27)

Course Duration : 3 Days

Course Description:

This course is designed to provide practical and theoretical knowledge to navigating officers on the preparation, appraisal, planning, execution, and monitoring of safe voyages using Electronic Chart Display and Information System (ECDIS).

The training is based on the guidelines of IMO Resolution A.893(21) (Guidelines for Voyage Planning) and IMO Model Course 1.27, ensuring compliance with international standards and best industry practices.

Officers will gain hands-on experience in developing comprehensive passage plans on ECDIS, including route creation, safety settings, alarm management, and real-time monitoring. Emphasis is placed on understanding system limitations, avoiding over-reliance on automation, and maintaining situational awareness.

The course enhances the competence of officers in safe navigation, efficient voyage execution, and compliance with statutory and inspection requirements.

Content of the Course:

• Principles of voyage planning as per IMO Resolution A.893(21).
• Stages of passage planning: Appraisal, Planning, Execution, and Monitoring.
• Familiarization with ECDIS functions, settings, and operational requirements.
• Chart selection, updating procedures, and correction management.
• Route planning and route checking using ECDIS.
• Setting safety parameters: safety depth, safety contour, and alarm settings.
• Identification and marking of navigational hazards and critical areas.
• Use of waypoints, wheel-over points, and track control systems.
• Integration of ECDIS with Radar, AIS, and other navigational equipment.
• Monitoring of vessel position and cross-track error during voyage.
• Alarm management and response to ECDIS warnings.
• Understanding limitations, errors, and risks associated with ECDIS.
• Backup arrangements and contingency planning.
• Bridge procedures and documentation of passage plans.
• Compliance with STCW requirements and industry best practices.
• Practical simulator exercises on passage planning and monitoring using ECDIS.
• Case studies and analysis of navigational incidents related to poor passage planning.
• Debriefing and performance evaluation.

ECDIS Type Specific Training – (Make & Model Specific)

Course Duration : 1–3 Days (As per maker instructions)

Course Description:

This course is designed to provide officers with type-specific training on a particular make and model of Electronic Chart Display and Information System (ECDIS), as required under STCW and flag state regulations.

The training focuses on achieving complete operational familiarity with the installed ECDIS onboard, enabling officers to safely and effectively use all functions of the equipment for voyage planning and monitoring.

In accordance with IMO Model Course 1.27 and manufacturer requirements, the course emphasizes correct system operation, safety settings, alarm management, and understanding of system limitations.

Officers will gain hands-on experience on the specific ECDIS system, ensuring compliance with statutory requirements, company procedures, and inspection standards.

Content of the Course:

• Introduction to type-specific ECDIS system architecture and components.
• System familiarization: menus, display settings, and user interface.
• Chart handling: ENC licensing, loading, updating, and corrections.
• Understanding display modes, layers, and information presentation.
• Route planning using type-specific ECDIS functions.
• Route checking and identification of hazards.
• Setting safety parameters: safety depth, contour, and alarm limits.
• Alarm management: types, prioritization, and response actions.
• Monitoring of vessel position, cross-track error, and navigation status.
• Integration with navigational sensors (GPS, gyro, log, AIS, radar).
• Use of additional features (route optimization, user charts, manual updates).
• System limitations, common errors, and best practices.
• Backup arrangements and procedures in case of ECDIS failure.
• Record keeping, logs, and data management.
• Compliance with STCW requirements and company procedures.
• Manufacturer-specific operational guidance and safety features.
• Practical exercises on the specific ECDIS model.
• Troubleshooting and handling abnormal situations.
• Debriefing and performance assessment.

Liquid Cargo Handling Simulator (LCHS) – Oil, Chemical & Gas Tankers (SIRE 2.0 Compliance 3.3.3) (Non – DG Approved)

Course Duration : 5 Days Each

Course Description:

This course is designed to provide practical and simulation-based training to deck and engine officers on the safe and efficient handling of liquid cargo operations onboard oil, chemical, and gas tankers using computer-based cargo handling simulators.

The training focuses on cargo planning, system familiarization, and operational procedures in line with industry best practices and inspection requirements, including SIRE 2.0 (Element 3.3.3).

Participants will gain hands-on experience in cargo operations such as loading, discharging, tank cleaning, and emergency handling. Emphasis is placed on understanding cargo systems, safety precautions, communication, and risk management to ensure compliance with international regulations and tanker industry expectations.

The course enhances competence in cargo operations, reduces operational risks, and prepares officers for real-life onboard scenarios and inspections.

Content of the Course:

• Introduction to liquid cargo handling systems for oil, chemical, and gas tankers.
• Familiarization with cargo plant layout, pipelines, valves, and instrumentation.
• Principles of cargo properties and hazards (oil, chemicals, liquefied gases).
• Cargo planning and preparation for loading and discharging operations.
• Pre-transfer checks, checklists, and safety procedures.
• Loading operations: sequence, rate control, topping off, and monitoring.
• Discharging operations: stripping, line clearing, and tank management.
• Ballasting and deballasting operations in relation to cargo handling.
• Tank cleaning operations and procedures.
• Inert gas systems, gas freeing, and atmosphere control.
• Use of cargo control room systems and automation.
• Emergency procedures: overflow, leakage, fire, and system failure.
• Communication and coordination between deck, engine room, and terminal.
• Application of risk assessment and permit-to-work systems.
• Compliance with **SIRE 2.0 requirements for cargo operations.
• Best practices for inspections and audits (vetting, terminal, and company).
• Simulator-based exercises covering real-life cargo scenarios.
• Troubleshooting and handling abnormal operational conditions.
• Debriefing and performance evaluation.

Risk Assessment & Management – Navigation, Cargo Operations, PMS, Cyber Security & Engine Room Operations

Course Duration : 3 Days

Course Description:

This course is designed to provide officers with comprehensive knowledge and practical skills in identifying, assessing, and managing risks associated with shipboard operations. The training covers key operational areas including navigation, cargo handling, planned maintenance systems (PMS), cyber security, and engine room operations.

The course emphasizes the application of structured risk assessment techniques in accordance with the **International Maritime Organization guidelines, **STCW Convention requirements, and **ISM Code principles.

Participants will develop the ability to evaluate hazards, implement control measures, and ensure safe and efficient operations onboard. The training integrates real-life scenarios, case studies, and best practices aligned with modern industry expectations, including vetting inspections and safety audits.

Content of the Course:

• Principles of risk assessment and risk management.
• Hazard identification techniques (HAZID, Job Safety Analysis – JSA).
• Risk evaluation methods and risk matrix application.
• Implementation of control measures and mitigation strategies.
• Risk assessment in navigation: Passage planning,Bridge operations, Collision avoidance and situational awareness
• Risk assessment in cargo operations: Loading and discharging,Handling of hazardous cargo,Tanker safety and procedures
• Risk assessment in Planned Maintenance Systems (PMS):Maintenance planning and execution,Equipment failure analysis,Permit-to-work systems
• Risk assessment in engine room operations:Machinery operations and monitoring,Emergency preparedness and response,Energy isolation and safety procedures
• Risk assessment in cyber security:Identification of cyber threats onboard, Protection of navigation and control systems,Safe use of IT and OT systems.
• Human factors and error management in risk assessment.
• Communication, teamwork, and safety culture onboard.
• Documentation and reporting of risk assessments.
• Compliance with company SMS procedures and industry best practices.
• Case studies of maritime incidents and lessons learned.
• Practical exercises and group discussions.
• Debriefing and performance evaluation.

ERRM ( ENGINE ROOM RESOURCE MANAGEMENT (STCW, RIGHTSHIP AND SIRE 3.3.4 REQUIREMENT)

Course Duration : 5 Days

Course Description:

This course is designed to provide practical and scenario-based training to engine room officers on the effective application of Engine Room Resource Management (ERRM) principles in accordance with the STCW Convention, **RightShip expectations, and SIRE 2.0 (Element 3.3.4).

The training focuses on optimizing the use of all available resources—personnel, equipment, and procedures—to ensure safe and efficient engine room operations under both normal and emergency conditions. Emphasis is placed on leadership, communication, situational awareness, decision-making, and workload management.

Participants will gain hands-on experience through simulator-based exercises and real-life scenarios, enabling them to minimize human error, enhance operational safety, and meet modern inspection and compliance requirements.

Content of the Course:

• Principles of Engine Room Resource Management (ERRM).
• Leadership, communication, and teamwork in the engine room.
• Situational awareness and workload management.
• Decision-making and problem-solving in operational and emergency situations.
• Effective use of engine room resources (personnel and equipment).
• Engine room watchkeeping practices as per STCW requirements.
• Familiarization with engine room systems and operational procedures.
• Planned Maintenance Systems (PMS) and maintenance management.
• Permit-to-work systems and safety procedures.
• Engine room operations during critical conditions (maneuvering, restricted operations).
• Human factors and error management in engine operations.
• Communication with bridge, control room, and shore personnel.
• Risk assessment and safe working practices in engine room.
• Compliance with **SIRE 2.0 requirements for engine room operations.
• Alignment with **RightShip expectations for safety and risk management.
• Simulator-based exercises covering real-life engine room scenarios.
• Troubleshooting and handling abnormal situations.
• Debriefing and performance evaluation.

SIRE 2.0 & RightShip Vetting Preparation – (Ship & Shore Staff)

Course Duration : 2–3 Days

Course Description:

This course is designed to prepare both shipboard and shore-based personnel for successful vetting inspections under SIRE 2.0 and RightShip requirements.

The training focuses on understanding the latest inspection methodologies, risk-based assessments, and human factor evaluations introduced in SIRE 2.0, along with RightShip’s expectations for operational excellence, safety culture, and risk management.

Participants will gain practical knowledge on how to prepare for inspections, demonstrate compliance, and respond effectively during vetting. The course emphasizes both onboard readiness and shore support systems, ensuring alignment between vessel operations and company management.

Content of the Course:

• Overview of vetting inspections and industry expectations.
• Introduction to **SIRE 2.0 structure, elements, and inspection methodology.
• Understanding human factors and risk-based approach in SIRE 2.0.
• Key focus areas for inspections: Navigation and bridge operations,Cargo operations, Engine room operations, Safety management systems
• Roles and responsibilities of ship and shore staff during vetting.
• Preparation of vessel for inspection: Documentation readiness, Equipment condition and maintenance, Housekeeping and safety compliance
• Understanding **RightShip vetting criteria and risk rating systems.
• Best practices for achieving positive inspection outcomes.
• Effective communication and behaviour during inspection.
• Handling inspector questions and demonstrating competence.
• Common deficiencies and how to avoid them.
• Alignment between shipboard practices and company SMS procedures.
• Pre-vetting internal audits and mock inspections.
• Reporting, follow-up, and corrective actions after inspection.
• Case studies and analysis of real vetting observations.
• Continuous improvement and maintaining vetting readiness.
• Practical exercises, role play, and mock inspection scenarios.
• Debriefing and performance evaluation.

ISM / ISPS / MLC Internal Auditor Course

Course Duration : 3 Days

Course Description:

This course is designed to provide shipboard and shore-based personnel with the knowledge and practical skills required to conduct internal audits in accordance with the ISM Code, ISPS Code, and Maritime Labour Convention 2006.

The training focuses on audit planning, execution, reporting, and follow-up actions to ensure compliance with statutory requirements and company Safety Management Systems (SMS). Participants will learn how to evaluate shipboard and shore-based operations, identify non-conformities, and recommend corrective actions for continuous improvement.

The course emphasizes practical auditing techniques, communication skills, and effective implementation of audit findings, preparing participants to carry out audits confidently and in line with international standards and industry best practices.

Content of the Course:

• Introduction to internal auditing principles and objectives.
• Overview of ISM Code, ISPS Code, and Maritime Labour Convention 2006 requirements.
• Roles and responsibilities of internal auditors.

Audit planning and preparation:

• Audit scope and objectives
• Audit checklists and documentation

Conducting internal audits:

• Opening meetings
• Interview techniques
• Evidence collection and verification

Audit of shipboard operations:

• Safety management procedures
• Emergency preparedness
• Documentation and records

• Audit of security procedures under ISPS Code.
• Audit of crew welfare, working conditions, and compliance under MLC 2006.
• Identification and classification of non-conformities and observations.
• Root cause analysis and corrective action planning.
• Audit reporting and documentation.
• Closing meetings and communication of findings.
• Follow-up audits and verification of corrective actions.
• Integration of audits with company SMS and continuous improvement.
• Best practices for effective auditing and compliance.
• Common audit findings and how to avoid them.
• Case studies and practical audit exercises.
• Role play and mock audit sessions.
• Debriefing and performance evaluation.

Cargo Claims & Charter Party Management

Course Duration : 3 Days

Course Description:

This course is designed to provide practical knowledge to shipboard and shore-based personnel on the effective handling of cargo claims and charter party management in commercial shipping operations.

The training focuses on understanding contractual obligations, documentation, and procedures required to prevent, handle, and defend cargo claims. It also covers the interpretation and application of charter party clauses, ensuring compliance with contractual terms between owners, charterers, and cargo interests.

Participants will gain insight into legal, operational, and commercial aspects of cargo handling, enabling them to minimize financial risks, avoid disputes, and manage claims efficiently. The course integrates real-life case studies and industry best practices to enhance decision-making and operational performance.

Content of the Course:

• Introduction to cargo claims and charter party concepts.
• Types of cargo claims:Shortage, Damage, Contamination, Delay
• Causes of cargo claims and preventive measures.
• Roles and responsibilities of owners, charterers, and agents.
• Cargo documentation: Bill of Lading (B/L), Mate’s Receipt, Cargo manifest and supporting documents

Introduction to charter parties:

• Voyage Charter
• Time Charter
• Bareboat Charter

Key charter party clauses:

• Laytime and demurrage
• Loading and discharging terms
• Off-hire clauses
• Safe port / safe berth clauses

Laytime calculation and statement of facts.

Demurrage and despatch calculation.

Responsibilities under charter party agreements.

Common disputes and claim scenarios in chartering.

Risk management and loss prevention strategies.

Case studies of cargo claims and charter party disputes.

Best practices for ship and shore coordination.

Legal considerations and dispute resolution methods.

Mental Health & Wellbeing of Seafarers

Course Duration : 1 Day

Course Description:

This course is designed to create awareness and provide practical tools for maintaining and improving the mental health and wellbeing of seafarers onboard ships. It addresses the unique challenges faced at sea, including isolation, long working hours, fatigue, stress, and separation from family.

The training aligns with the welfare provisions of the Maritime Labour Convention 2006 and promotes a supportive onboard environment that enhances safety, performance, and crew morale.

Participants will learn how to recognize early signs of mental stress, anxiety, depression, and burnout, and how to manage these effectively. The course also focuses on building resilience, improving communication, and fostering a positive safety culture onboard.

Content of the Course:

• Introduction to mental health and wellbeing at sea.

Common mental health challenges faced by seafarers:

• Stress
• Fatigue
• Anxiety
• Depression
• Isolation and loneliness

Access to support systems:

• Company support
• Helplines and welfare organizations
• Shore-based assistance
• Impact of mental health on safety, performance, and decision-making.
• Understanding fatigue and its management onboard.
• Recognizing early warning signs of mental health issues.
• Coping strategies and stress management techniques.
• Building resilience and emotional wellbeing.
• Work-life balance and maintaining routine at sea.
• Importance of communication and peer support onboard.
• Leadership role in promoting mental wellbeing.
• Creating a positive and supportive onboard environment.
• Awareness of substance abuse and its impact.
• Promoting healthy lifestyle habits (sleep, diet, exercise).
• Case studies and real-life scenarios.
• Practical exercises and group discussions.
• Debriefing and feedback.

DPA / CSO / Safety Officer Training Course

Course Duration : 5 Days

Course Description:

This course is designed to provide comprehensive knowledge and practical understanding of the roles and responsibilities of Designated Person Ashore (DPA), Company Security Officer (CSO), and Shipboard Safety Officer in accordance with international maritime regulations and industry best practices.

The training focuses on the implementation and effective management of Safety Management Systems (SMS), security procedures, and onboard safety practices in line with the ISM Code, ISPS Code, and Maritime Labour Convention 2006.

Participants will gain the skills required to ensure regulatory compliance, manage risks, conduct audits, respond to emergencies, and promote a strong safety and security culture both onboard and ashore. The course integrates practical scenarios, case studies, and real-life operational challenges.

Content of the Course:

• Introduction to roles and responsibilities of DPA, CSO, and Safety Officer.
• Overview of ISM Code, ISPS Code, and Maritime Labour Convention 2006 requirements.
• Safety Management System (SMS) implementation and monitoring.
• Communication link between ship and shore (role of DPA).
• Incident reporting, investigation, and root cause analysis.
• Risk assessment and risk management procedures.
• Emergency preparedness and response coordination.
• Internal audits and inspections.
• Roles and responsibilities of Company Security Officer (CSO).
• Ship Security Plan (SSP) implementation and maintenance.
• Security levels, threat assessment, and response actions.
• Access control, cargo security, and shipboard security procedures.
• Roles and responsibilities of Shipboard Safety Officer.
• Onboard safety procedures and hazard identification.
• Permit-to-work systems and safe working practices.
• Safety meetings, drills, and crew training.
• Accident prevention and safety culture development.
• Compliance with statutory and company requirements.
• Coordination with flag state, port state, and external auditors.
• Documentation, record keeping, and reporting systems.
• Case studies and analysis of maritime incidents.
• Practical exercises and role-based scenarios.
• Debriefing and performance evaluation.

Behavior Based Competency (BBC) Training

Course Duration : 2 Days

Course Description:

This course is designed to enhance the behavioral competencies of shipboard and shore-based personnel, focusing on the human factors that directly impact safety, performance, and operational efficiency in the maritime industry.

The training emphasizes the development of positive work behaviors, effective communication, leadership, teamwork, and decision-making skills. It aligns with the human element requirements of the International Maritime Organization, the STCW Convention, and supports compliance with modern inspection frameworks such as SIRE 2.0 and RightShip.

Participants will gain practical tools to improve attitude, accountability, situational awareness, and interpersonal effectiveness, leading to safer operations and a stronger safety culture onboard and ashore.

Content of the Course:

• Introduction to behavior-based competency and human factors.
• Understanding attitudes, behaviors, and their impact on safety.

Core competencies:

• Communication
• Teamwork
• Leadership
• Decision-making
• Situational awareness
• Behavioral aspects of safety and risk management.
• Human error and error prevention techniques.
• Situational awareness and workload management.
• Effective communication and assertiveness.
• Leadership styles and their impact on team performance.
• Team dynamics and collaboration onboard.
• Cultural diversity and interpersonal relationships at sea.
• Conflict management and resolution techniques.
• Stress management and emotional intelligence.
• Building accountability and ownership in operations.
• Safety culture and behavioral safety practices.
• Application of behavioral competency in navigation, cargo, and engine operations.
• Case studies and real-life incident analysis (human factor related).
• Practical exercises, role plays, and group discussions.

Tanker Operations for Ratings (Oil, Chemical & Gas Tankers)

Course Duration : 5 Days Each

Course Description:

This course is designed to provide practical knowledge and skill development for ratings engaged in tanker operations onboard oil, chemical, and gas tankers. The training focuses on safe working practices, cargo handling support activities, and understanding of tanker operations in accordance with STCW Convention requirements and industry best practices.

Participants will gain essential knowledge of tanker terminology, safety procedures, and operational duties required during cargo operations. Emphasis is placed on hazard awareness, use of personal protective equipment (PPE), communication, and teamwork to ensure safe and efficient operations.

The course prepares ratings to effectively assist officers during cargo handling, maintenance, and emergency situations onboard tankers.

Content of the Course:

• Introduction to tanker operations (oil, chemical, and gas tankers).
• Basic tanker terminology and familiarization.
• Roles and responsibilities of ratings during cargo operations.
• Overview of cargo handling systems and equipment.

Hazards associated with tanker cargoes:

• Flammable and explosive cargo
• Toxic and corrosive substances
• Low temperature (LNG/LPG) hazards
• Personal Protective Equipment (PPE) and safe working practices.
• Deck operations during loading and discharging.
• Basic understanding of pipelines, valves, and pumps.
• Tank cleaning operations and safety precautions.
• Inert gas systems and gas detection basics.
• Cargo watchkeeping duties and communication procedures.
• Permit-to-work systems and safety procedures.
• Fire prevention and firefighting basics on tankers.

Emergency response procedures:

• Cargo leakage
• Fire and explosion
• Toxic exposure
• Housekeeping and pollution prevention (MARPOL awareness).
• Basic maintenance and equipment care.
• Teamwork and communication onboard.
• Compliance with safety procedures and company requirements.
• Practical demonstrations and familiarization exercises.
• Debriefing and feedback.

RPSL AND MLC ISM FAMILIARIZATION( MS RULE 2016 5B)

Course Duration : 2 Days

Course Description:

This course is designed to provide essential knowledge and awareness to shipboard and shore-based personnel regarding Recruitment and Placement Services (RPSL), seafarers’ rights under the Maritime Labour Convention 2006, and safety management practices as per the ISM Code, in accordance with Merchant Shipping Rules 2016 (Rule 5B).

The training focuses on ensuring compliance with statutory requirements related to seafarer recruitment, employment conditions, welfare, and onboard safety systems. Participants will gain a clear understanding of their rights, responsibilities, and obligations under national and international regulations.

The course enhances awareness of ethical recruitment practices, working conditions, documentation, and safety culture, preparing participants for safe and compliant maritime operations.

Content of the Course:

• Introduction to Recruitment and Placement Services (RPSL).
• Overview of Merchant Shipping Rules 2016 (Rule 5B) requirements.
• Roles and responsibilities of RPSL agencies.
• Seafarer recruitment procedures and documentation.
• Employment agreements and contract conditions.

Overview of Maritime Labour Convention 2006:

• Seafarers’ rights and entitlements
• Working and living conditions onboard
• Wages, leave, and repatriation
• Medical care and welfare provisions

Overview of ISM Code:

• Safety Management System (SMS)
• Roles and responsibilities onboard
• Safety procedures and compliance
• Familiarization with onboard safety practices.
• Documentation and record keeping requirements.
• Ethical recruitment and prevention of exploitation.
• Coordination between ship, company, and RPSL agency.
• Compliance with statutory and company requirements.
• Awareness of inspections, audits, and certification.
• Case studies and practical scenarios.
• Discussion and clarification of common issues.
• Debriefing and feedback.

Port State Control (PSC) Inspection Preparation & Compliance

Course Duration : 3 Days

Course Description:

This course is designed to provide shipboard and shore-based personnel with comprehensive knowledge and practical guidance on Port State Control (PSC) inspections, procedures, and compliance requirements.

The training focuses on preparing vessels for PSC inspections in accordance with international conventions and regulations enforced by regional MoUs such as Paris MoU, Tokyo MoU, and others. It emphasizes understanding inspection priorities, identifying common deficiencies, and maintaining continuous readiness.

Participants will learn how to effectively prepare for inspections, respond to PSC officers, and ensure compliance with key regulations such as SOLAS Convention, MARPOL Convention, STCW Convention, and the Maritime Labour Convention 2006.

The course enhances the ability of officers and shore staff to reduce deficiencies, avoid detentions, and maintain high operational standards.

Content of the Course

• Introduction to Port State Control (PSC) and its objectives.
• Legal framework and applicable international conventions.
• Inspection procedures and targeting systems.
• Roles and responsibilities of ship and shore staff.
• Handling PSC officers and effective communication.
• Deficiency reporting and corrective actions.
• Detention criteria and consequences.
• Follow-up inspections and clearance procedures.
• Best practices for maintaining continuous compliance.
• Integration with Safety Management System (SMS).
• Case studies of PSC detentions and lessons learned.
• Mock inspections and practical exercises.
• Debriefing and performance evaluation.

PSC inspection process:

• Initial inspection
• Detailed inspection
• Expanded inspection

Common PSC deficiencies and how to avoid them:

• Safety equipment
• Navigation
• Engine room
• Pollution prevention
• Crew certification and welfare

Preparation of vessel for PSC inspection:

• Documentation and certification
• Equipment readiness
• Housekeeping and maintenance

Overview of major PSC regimes:

• Paris MoU
• Tokyo MoU
• Other regional MoUs

BULK CARRIER SAFETY

Course Duration : 3 Days

Course Description:

This course is designed to provide shipboard and shore-based personnel with comprehensive knowledge of safety practices specific to bulk carrier operations. The training focuses on the safe carriage of bulk cargoes, structural safety, cargo-related risks, and operational best practices.

The course aligns with international regulations and industry guidelines, including the SOLAS Convention, the IMSBC Code, and relevant provisions of the ISM Code.

Participants will gain practical knowledge on cargo hazards, loading and unloading procedures, ballast operations, and emergency preparedness to ensure safe and efficient operations onboard bulk carriers.

Content of the Course:

• Introduction to bulk carrier operations and vessel types.
• Cargo loading and unloading procedures.
• Cargo trimming and securing.
• Ballasting and deballasting operations.
• Hold preparation and inspection.
• Ventilation requirements and moisture control.
• Use of cargo plans and loading instruments.
• Safety precautions during cargo operations.
• Permit-to-work systems and risk assessment.
• Crew safety and use of Personal Protective Equipment (PPE).
• Pollution prevention and environmental protection.
• Communication with terminal and shore personnel.
• Case studies of bulk carrier incidents and losses.
• Best practices for safe bulk carrier operations.
• Practical exercises and discussions.
• Debriefing and feedback.

Emergency procedures:

• Cargo liquefaction
• Fire in cargo holds
• Structural damage

Structural safety and stress management:

• Hull stresses
• Shear forces and bending moments

Cargo hazards:

• Liquefaction
• Cargo shifting
• Self-heating and fire risk
• Dust and toxic gases

Types of bulk cargoes and their characteristics:

• Grain, coal, ore, concentrates
• Dangerous and hazardous cargoes

Overview of applicable regulations and codes:

• SOLAS Convention
• IMSBC Code
• ISM Code

Hazardous Materials (HAZMAT) Management & Safety

Course Duration : 3 Days

Course Description:

This course is designed to provide shipboard and shore-based personnel with essential knowledge and practical skills for the safe handling, storage, transportation, and management of hazardous materials (HAZMAT) in maritime operations.

The training covers identification of hazardous substances, risk assessment, emergency response, and compliance with international regulations including the IMDG Code, MARPOL Convention, SOLAS Convention, and the ISM Code.

Participants will gain practical understanding of hazard communication, labeling, documentation, and safe operational procedures to minimize risks to personnel, vessel, and the environment.

Content of the Course:

• Introduction to hazardous materials (HAZMAT) and classification.
• Classification of dangerous goods (IMDG classes).
• Hazard identification and risk assessment.
• Packaging, labeling, marking, and placarding requirements.
• Stowage and segregation of hazardous materials.
• Handling procedures and safety precautions.
• Use of Personal Protective Equipment (PPE).
• Cargo securing and transport safety.
• Firefighting methods for hazardous materials.
• Pollution prevention and environmental protection.
• Safe disposal of hazardous waste.
• Communication and reporting procedures.
• Role of crew and shore staff in HAZMAT management.
• Compliance with company procedures and safety systems.
• Case studies of hazardous material incidents.
• Practical exercises and group discussions.
• Debriefing and performance evaluation.

Emergency response procedures:

• Spillage and leakage
• Fire and explosion
• Toxic exposure

Documentation:

• Dangerous Goods Declaration
• Material Safety Data Sheets (MSDS) / Safety Data Sheets (SDS)

Overview of applicable regulations and codes:

• IMDG Code
• MARPOL Convention
• SOLAS Convention
• ISM Code

Passenger Ship Familiarization (PSF) course is intended for Ratings and other personnel who will be serving on passenger ships as part of the complement and covers the mandatory training requirements prescribed in STCW 95, Reg. V/3, STCW code Section A-V/3, MS (STCW) Rules, 1998, chapter V, rule 32 and META manual Chapter V, section M-V/3

COURSE DURATION : 2 DAYS

Course Objective:

On completion of Passenger Ship Familiarization (PSF) course the trainee would be able to serve in the capacity of ratings or other personnel on passenger ships. In addition to their normal duties as ratings they would be able to assist in handling passenger and an emergency on board

Passenger Ship Familiarization (PSF) Course Content:

Passenger Ship Familiarization (PSF) Disasters: brief history of passenger ship disasters, recent passenger ship disasters Basic passenger ship requirements

Emergency Preparedness :

•  Emergency Organisation
•  Alarm and initial response
• Bridge Procedures – Bridge Team concept, functional bridge team, check list, logs
•  Organisation of emergency teams
•  Location of muster
•  Duties of emergency teams
•  Communication & Reporting on board
•  Emergency drills

Familiarisation training:

• Basic Procedures for opening closing and securing hull openings
•  Basic stability and stress requirements and limitations
•  Procedures for the maintenance of special equipment on passenger ships
•  Loading and cargo securing, Dangerous cargo areas, Emergency procedures.